Catherine Carpet June 19th, 2018 - 19:34:11
Loose fibers in the carpet- Watch out for loose fibers in the carpet. These can get snagged on the rotating brush roller and rip apart you carpet; or clog and damage the roller on your machine. If you know you have loose fibers in your carpet the easiest solution is to take a scissors and trim off the loose fibers as close to the base of the carpet as possible. This will hopefully prevent any snagging of the fibers on the roller. Have a plan of attack- Planning your route or order of carpets can save some headaches at the end of the project. Carpet cleaning professionals have done this enough times that it becomes second nature but you should plan your route so that you do not need to walk across already cleaned carpeting until it is completely dry.
Every once and awhile people find that their carpeting has stains that they cannot remove no matter how hard they try. They may also find that high-traffic areas of carpeting look flattened and discolored. When you want to fix the appearance of your existing home carpet with a new one you should first consider replacing the areas that are bothering you the most. One way to target highly-specific areas of your carpet for replacement is by utilizing carpet remnants. Replacing your existing carpet with carpet-remnants is very easy to do and will look great once you are finished. The reason that you will end up with an excellent-looking carpet after adding carpet-remnants is due to the fact that the carpet remnants are the exact same color material and texture as your existing carpet.
Adding carpet remnants to your living room can be perfect for preventing your existing carpet from getting damaged. A carpet remnant is considered to be any remaining strip of carpet that is left-over from your carpet-installation process; remnants will vary in size and shape. They are typically cut down to a specific size in order to help fill in a carpet space that is damaged or that is getting replaced. When buying a brand new carpet for your home chances are good that you saved all of the extra carpeting that was not used. You may have sold it but most people choose to save their excess carpeting due to the fact that they know that they may need places of their existing carpet to get replaced.
Removing the damaged carpet: Start by using a straight edge and a row finder. An ice pick or a Phillips screwdriver can be used instead of a row finder. Place the straight edge on the carpet with the groove side down. Use the row finder to separate the nap. Do this by dragging the point of the row finder across the carpet up and down and against the edge of the straight edge. Use a slotted blade knife with a fresh blade. You can use a slotted blade knife (butted up against the straight edge to cut through the carpet without cutting through too much of the nap if you used the row finder properly. The more nap you cut off the worse the carpet patch will look.