Catherine Carpet June 19th, 2018 - 19:49:26
Removing the damaged carpet: Start by using a straight edge and a row finder. An ice pick or a Phillips screwdriver can be used instead of a row finder. Place the straight edge on the carpet with the groove side down. Use the row finder to separate the nap. Do this by dragging the point of the row finder across the carpet up and down and against the edge of the straight edge. Use a slotted blade knife with a fresh blade. You can use a slotted blade knife (butted up against the straight edge to cut through the carpet without cutting through too much of the nap if you used the row finder properly. The more nap you cut off the worse the carpet patch will look.
Removing replacing or installing new built-in furniture walls floor heaters toilets cabinets and other fixtures are just a few reasons that a carpet installer will need install the carpet properly into the room. This will require some new tack strip and possibly some new carpet and pad to add to the area. Many times the customer will have some carpet left over from the installation. If not we can often take carpet from the closet. Removing carpet and carpet pad is simple but sometimes strenuous. If we are trying to save the carpet to use in a different room or to re-carpet the hallway or stairway we will want to try to keep it in one piece. If the objective is just to remove old carpet and old carpet pad we will make it easy on ourselves by cutting the carpet into strips approximately two feet wide.
Even if you do not use carpet remnants to replace your existing carpeting you should still realize that they may be useful. Some people cut up their carpet-remnants and use them in order to place under the legs of chairs and tables in order to prevent them from making a permanent indentation in your actual carpeting and the carpet pad. You may have also seen people using carpet remnants as a small mat in their kitchen area or to cover up a stained area of carpet. Most people can find uses for their carpet-remnants throughout their house. For this reason it is always recommended that you save your carpet remnants when you initially purchase a new carpet. Do not think that you will benefit from getting a very small amount of money for your remnants. After all your remnants will match the color and texture of your carpeting they are not meant to be given to someone else. If you save your carpet remnants you will surely be able to find a good use for them.
Every once and awhile people find that their carpeting has stains that they cannot remove no matter how hard they try. They may also find that high-traffic areas of carpeting look flattened and discolored. When you want to fix the appearance of your existing home carpet with a new one you should first consider replacing the areas that are bothering you the most. One way to target highly-specific areas of your carpet for replacement is by utilizing carpet remnants. Replacing your existing carpet with carpet-remnants is very easy to do and will look great once you are finished. The reason that you will end up with an excellent-looking carpet after adding carpet-remnants is due to the fact that the carpet remnants are the exact same color material and texture as your existing carpet.