Nanna Brunault Carpet June 18th, 2018 - 19:48:39
Every once and awhile people find that their carpeting has stains that they cannot remove no matter how hard they try. They may also find that high-traffic areas of carpeting look flattened and discolored. When you want to fix the appearance of your existing home carpet with a new one you should first consider replacing the areas that are bothering you the most. One way to target highly-specific areas of your carpet for replacement is by utilizing carpet remnants. Replacing your existing carpet with carpet-remnants is very easy to do and will look great once you are finished. The reason that you will end up with an excellent-looking carpet after adding carpet-remnants is due to the fact that the carpet remnants are the exact same color material and texture as your existing carpet.
Cut the seam tape to the size of the carpet patch. Line up the carpet seam tape so that half of it is under the existing carpet and the other half of it will be under the patch. Use the glue gun to apply a generous amount of hot glue under the seam of the carpet. Slowly work your way all the way around the carpet until you have glued the carpet patch into place. (hint have a glass of water right next to you for when you get molten hot glue on your fingers. A quick dip will cool it off right away and prevent you from experiencing nearly as much pain.) When gluing the carpet patch down using the glue gun pay special attention to the backing. You want to glue the backing down so that its butted up just right. Also be especially careful to avoid getting the nap of the carpet pushed down into the hot glue. Its a mess when that happens and theres no recovery.
Carpet stretching is generally done in two different situations: During the initial installation and for a carpet repair. The initial stretch during installation ensures that the carpet is taught secure and even across the entire floor covering. Taught carpet will stay in place and stay smooth and flat to the floor where it belongs.Poor installation: The carpet may have been improperly installed. In most cases of a bad installation the installer didnt use a power stretcher properly or at all. Excessive wear due to traffic: Sometimes a carpet will need to be re-stretched because of wheelchairs walkers tricycles etc. Even when installed to perfection it can become loose from excessive wear.
Like any type of carpet repair stretching carpet is more involved than it seems to be. Stretching carpet isnt just a matter of smoothing out ripples and re-securing or pulling at the edges by hand as you would a bed sheet. Carpet stretching comes with its own tools and techniques that help you do the job right. A professional who repairs carpet for a living will have all of these tools on hand. If you decide to try and stretch carpet yourself most or all of these tools should be available for rental or purchase at a relatively reasonable price. Even contracting out your carpet stretching is far more cost-effective than replacing the carpet so either way these tools in your hands or someone elses save you quite a bit of money.