Isabelle Bousquet Carpet June 18th, 2018 - 18:58:38
The next phase would involve the cleaning process itself. The removal of the resurfaced dirt will be done here. As mentioned there are different ways of cleaning the carpets but just so you know there are just three major cleaning procedures done when it comes to carpet cleaning. Carpet cleaning would involve hot water extraction dry extraction and cold water extraction. These methods usually work for a certain type of carpet cleaning job. It is best to research first on which is the suitable cleaning method to do so that cleaning will be done in the best way possible without leaving any dirt behind.
Knee stretcher. A knee stretcher also known as a kicker is a special tool that has a grip on one end to attach to the carpet and a pad on the other end for you to kick with your quadriceps (do not kick with your knee! Power carpet stretcher. In the trade we usually call this too our stretcher. The stretcher is the most important tool for stretching carpet. Its specially designed to adjust to any size room and help stretch carpet much more effectively than anyone could do by hand (or by knee). A power carpet stretcher features a very long pole with a carpet grip on one end a wall brace on the other and a handle lever in the middle. Dont even try to stretch a carpet without one. This is the most expensive tool most of us carpet people have.
Turn the carpet patch over and use the straight edge to cut a perfect patch from the back. If you are untrained chances are that you wont be able to cut a perfect patch. (Tip use a fresh blade in the slotted blade carpet knife) Now that the carpet patch is cut exactly perfect without any gaps or overlaps at the seams its time to seal the edges. You can seal the edges with latex or with a glue gun. Just use the slightest amount of glue along both edges so that there wont be fraying in the future. Not everyone seals the edges but it is highly recommended. The carpet patch is cut to perfection the edges are sealed and now youre ready to adhere the carpet patch to the rest of the carpet. The way we do it is to use a special carpet seam tape with an iron or with a hot glue gun. For the beginner Id recommend using the glue gun.
I usually plan my base of operations as the kitchen and work the entire project to end in the kitchen. Cleaning your carpet steam cleaner- It seems one of the biggest problems I see with machines breaking down or not working after the first or second use is not taking the time to properly clean out your machine after use. It is very important to flush out the entire machine with clean water to ensure that no soap ends up clogging the solution discharge system especially the discharge nozzles. Many manufactures view lack of cleaning as neglect and are hesitant to warranty any mechanical problems that arise because of it.