Catherine Carpet June 19th, 2018 - 19:45:56
Many people install their own tile but dont know how to finish the job with the carpet to tile transition. Often professional tile installers dont know how to finish their job with a proper carpet to tile transition. There are several good ways to do a carpet to floor transition that I will explain in the carpet to tile transition article. When people refer to a Berber carpet theyre referring to a looped carpet with rows. Its not really a Berber carpet but for our purposes here its okay to call it Berber. For an interesting read on the history of Berber carpet click here. Berber carpet repair is often needed due to a snag in a Berber carpet or a pull in a Berber carpet. A pull in a Berber carpet happens when one or more threads get caught either in a vacuum or some other way. Often times its the family pet or a child that pulls Berber carpet and creates the snag or run.
I usually plan my base of operations as the kitchen and work the entire project to end in the kitchen. Cleaning your carpet steam cleaner- It seems one of the biggest problems I see with machines breaking down or not working after the first or second use is not taking the time to properly clean out your machine after use. It is very important to flush out the entire machine with clean water to ensure that no soap ends up clogging the solution discharge system especially the discharge nozzles. Many manufactures view lack of cleaning as neglect and are hesitant to warranty any mechanical problems that arise because of it.
Use an awl to lift the edge of the carpet. Go to a corner of the room and poke the awl right through the carpet about 6" from the wall. From here you will be able to pull the carpet up. If you dont have an awl you can probably use a pair of pliers. Now its time to unpack the carpet stretcher. Set it up so that the foot end is up against the baseboard and the head is a few inches from the wall that you are stretching towards. The power stretcher is more than strong enough to rip carpet so be careful to only stretch the carpet just enough to remove the wrinkles (and maybe just a little bit more). Over stretching carpet isnt a good idea because you will create ripples going the other direction. So again only stretch the carpet as much as you need to in order to remover the ripples.
Removing replacing or installing new built-in furniture walls floor heaters toilets cabinets and other fixtures are just a few reasons that a carpet installer will need install the carpet properly into the room. This will require some new tack strip and possibly some new carpet and pad to add to the area. Many times the customer will have some carpet left over from the installation. If not we can often take carpet from the closet. Removing carpet and carpet pad is simple but sometimes strenuous. If we are trying to save the carpet to use in a different room or to re-carpet the hallway or stairway we will want to try to keep it in one piece. If the objective is just to remove old carpet and old carpet pad we will make it easy on ourselves by cutting the carpet into strips approximately two feet wide.