Catherine Carpet June 19th, 2018 - 19:46:16
As time passes by the popularity of carpets in homes have changed the way that people are cleaning their carpets. In the past carpet cleaning only meant having to use baking soda paste scrub in order to remove whatever is trapped in the carpet fibers. As time passed by people have devised so many cleaning methods in order to ensure cleaner carpets. There are so many cleaning chemicals that can be bought so that people will not have a hard time cleaning their most prized possession. There are products which remove stains such as carpet shampoo deep steam carbonated water carpet powders and protectors. All of these products claim to remove the stains and soils that have accumulated in the carpet for some time now.
Be sure and read the mixing direction on the back of the product you purchase. A solution that is too diluted will not clean and too much soap will leave your carpeting full of suds and will not extract properly. The nice thing about many new carpet steam cleaner machines on the market is their ability to mix the correct amount of soap right onboard the machine so you dont have to worry about measuring. I would recommend cleaning furniture drapes and small area rugs first. Any over spray from cleaning these will end up on the carpeting and will be extracted later anyways. Always check labeling before cleaning furniture to make sure that it can be cleaned with water. Also steer clear of soaking down furniture too much with the solution. Because furniture is contoured and uneven it is difficult to create a good seal on the extraction wand which can limit the water removal.
Determining cost vs. value can be a bit of a balancing act. Understanding use and traffic may also keep you from buying budget priced carpet that over time will be disappointing. Short-term savings may result in greater long term cost. Maintenance: No matter what style or price carpet you choose without proper care and maintenance it will wear-out prematurely and need to be replaced before its time. The single most important thing you can do for your carpeting is summed up in three words: vacuum vacuum vacuum! Regular thorough vacuuming removes sand dirt grit and dust before it can work down deeply into the carpets fiber and backing. When these contaminates are allowed to grind their way into carpeting they have an abrasive action that can damage fray and even cut through carpet fibers.
Turn the carpet patch over and use the straight edge to cut a perfect patch from the back. If you are untrained chances are that you wont be able to cut a perfect patch. (Tip use a fresh blade in the slotted blade carpet knife) Now that the carpet patch is cut exactly perfect without any gaps or overlaps at the seams its time to seal the edges. You can seal the edges with latex or with a glue gun. Just use the slightest amount of glue along both edges so that there wont be fraying in the future. Not everyone seals the edges but it is highly recommended. The carpet patch is cut to perfection the edges are sealed and now youre ready to adhere the carpet patch to the rest of the carpet. The way we do it is to use a special carpet seam tape with an iron or with a hot glue gun. For the beginner Id recommend using the glue gun.