Catherine Carpet June 19th, 2018 - 19:47:25
Removing replacing or installing new built-in furniture walls floor heaters toilets cabinets and other fixtures are just a few reasons that a carpet installer will need install the carpet properly into the room. This will require some new tack strip and possibly some new carpet and pad to add to the area. Many times the customer will have some carpet left over from the installation. If not we can often take carpet from the closet. Removing carpet and carpet pad is simple but sometimes strenuous. If we are trying to save the carpet to use in a different room or to re-carpet the hallway or stairway we will want to try to keep it in one piece. If the objective is just to remove old carpet and old carpet pad we will make it easy on ourselves by cutting the carpet into strips approximately two feet wide.
When an original installation is done properly you should never need to re-stretch loose carpet. Proper installation requires a tool called a stretcher or a power stretcher. (Not a kicker kickers arent nearly enough.) When you see ripples wrinkles or bunched-up carpet thats when you know you need to have it stretched. Most of the time a loose carpet can be re-stretched without needing to take apart seams. If seams do need to be taken apart it opens up a whole other can of worms. If theres some furniture in the room we can often use our carpet stretcher without having to clear the room entirely. Often we can move the furniture from one side of the room to the other and stretch one side of the room at a time.
If you have a stain that you cant get out or you have damaged carpet due to a burn (not the good kind) or your bad dog or cat thinks that carpet is a food group then a patch may be the only solution. Patching isnt as easy as it looks. The patch needs to be exactly perfect. If theres any overlap or gap at the seam (at all) youll be sorry. You can use a leftover piece of carpet from the original installation or steal a piece of carpet from a closet to do your carpet patching. One thing you probably cant do is go to the carpet store and buy a piece to match. A carpet to floor transition is anyplace where the carpet ends and the floor begins. If its at a tile floor we call it a carpet to tile transition.
The next phase would involve the cleaning process itself. The removal of the resurfaced dirt will be done here. As mentioned there are different ways of cleaning the carpets but just so you know there are just three major cleaning procedures done when it comes to carpet cleaning. Carpet cleaning would involve hot water extraction dry extraction and cold water extraction. These methods usually work for a certain type of carpet cleaning job. It is best to research first on which is the suitable cleaning method to do so that cleaning will be done in the best way possible without leaving any dirt behind.